Measurement-computing Micro 488/EX rev.2.1 Instrukcja Użytkownika Pobierz pdf (Strona 84)

Section 5 Command Descriptions

5.14

message is sent, the internal status, as read by the

STATUS

command, is cleared. This event is tested after the

IDLE

event. If

IDLE

ARM

ed, the

CHANGE

event will only be reported when an

un-addressed to an addressed transition occurs.

ERROR

The event message '

ERROR

' is returned to the serial host when the

Micro488/EX detects an error condition. The error condition may be

an un-recognized command from the serial host, an invalid

parameter or a bus error. Refer to Appendix B for a listing of the

error conditions which can be detected and reported by the

Micro488/EX. This event is level sensitive. When the event message

is sent, the error status, as read by any of the

STATUS

commands,

must be read prior to

ARM

ing this event again.

Once a condition is

ARMed

it remains

ARMed

until it is

DISARMed

, the event

specified has occurred or until the Micro488/EX is reset.

The

ARM

and

event

DOMACRO

commands are mutually exclusive. The

last command issued takes precedence.

SYNTAX ARM

[;]

[event[event…]]

[;]

[event[event…]]

where

event…

may include…

Event Abbr Form

SRQ

PERIPHERAL PE

CONTROLLER CO

TRIGGER TR

CLEAR CL

TALK T

LISTEN L

IDLE I

CHANGE CH

ERROR ER

If no event is specified,

ARM

SRQ

is assumed for upward

compatibility with other IOtech products.

1 2 ... 79 80 81 82 83 84 85 86 87 88 89 ... 217 218

Komentarze do niniejszej Instrukcji

Brak uwag

Measurement-computing Micro 488/EX rev.2.1 Instrukcja Użytkownika Strona 84

Komentarze do niniejszej Instrukcji

Powiązane produkty i podręczniki dla Sprzęt komputerowy Measurement-computing Micro 488/EX rev.2.1