Measurement-computing Micro 488/EX rev.2.1 Instrukcja Użytkownika Strona 157
- Strona / 218
- Spis treści
- BOOKMARKI
Oceniono. / 5. Na podstawie oceny klientów
Section 5 Command Descriptions
5.87
TIME FORMAT
The
TIME
FORMAT
command allows the user to select the format of the
TIME
command response. Several different formats are provide including 12 and 24 hour
representations. The power-on factory default is
HH:MM:SS AM
. This default can be
modified with the
SAVE
command. Refer to the
SAVE
command for details.
The relationship between the 12 and 24 hour operations are…
24 Hour 12 Hour
Midnight 00:00:00 12:00:00 AM
01:00:00 01:00:00 AM
……
11:59:59 11:59:59 AM
Noon (Midday) 12:00:00 12:00:00 PM
13:00:00 01:00:00 PM
……
23:59:59 11:59:59 PM
SYNTAX
TIME
FORMAT
[
;
] {
option
}
The option specifies one of the following formats…
option
Example Output
Length 12/24 Hr
HH:MM 12:21
5 Bytes Fixed 24 Hr
HH:MM:SS 12:21:32
8 Bytes Fixed 24 Hr
HH:MM /AM 12:21
5 Bytes Fixed 12 Hr
HH:MM:SS /AM 12:21:32
8 Bytes Fixed 12 Hr
HH:MM AM 12:21 AM
8 Bytes Fixed 12 Hr
HH:MM:SS AM 12:21:32 AM
11 Bytes Fixed 12 Hr
The
AM
or
/AM
is used to set the 12 hour output format.
It may be interchaged with
PM
or
/PM
which has the same
effect.
RESPONSE None
MODE Any
- Micro 488/EX User’s Manual 1
- Table of Contents 3
- Introduction 9
- Section 1 Introduction 10
- &$87,21 11
- Section 1 Introduction 12
- Getting Started 15
- SW3 Factory Default Settings 16
- SW2 Factory Default Settings 16
- SW1 Factory Default Settings 16
- Section 2 Getting Started 17
- 8 Data Bits 7 Data Bits 19
- 1 Stop Bit 2 Stop Bits 19
- Odd Parity Mark Parity 20
- Even Parity Space Parity 20
- Parity Disabled 20
- Echo Disabled Echo Enabled 20
- RTS/CTS Xon/Xoff 21
- CR Only LF-CR 23
- LF Only CR-LF 23
- EOI Disabled EOI Enabled 23
- System Controller 25
- Peripheral 25
- Controller Pass-Thru 25
- Peripheral Pass-Thru 25
- (RS-422) 31
- (RS-232) 31
- IEEE Operating Modes 35
- General Programming 43
- Section 4 General Programming 44
- < 5 Second Delay> 52
- 64
- Read Macro Buffers Program 64
- Command Descriptions 71
- DATE FORMAT 91
- DAY FORMAT 94
- ENTER (Controller mode) 100
- ENTER (Peripheral mode) 102
- ERASE LOG 105
- LOCAL LOCKOUT or LOL 110
- LOG MEMORY 112
- MACRO…ENDM 113
- ON <event> DOMACRO 118
- OUTPUT (Controller mode) 123
- OUTPUT (Peripheral mode) 125
- PASS CONTROL 127
- PPOLL CONFIG or PPC 129
- PPOLL DISABLE or PPD 131
- PPOLL UNCONFIG or PPU 132
- READ LOG 134
- SET DATE 143
- SET TIME 146
- TIME FORMAT 157
- TIME OUT 159
- RS-422 RS-232 170
- Shorting Plug 170
- SRQ on Last 176
- Terminator Disabled 176
- Terminator Enabled 176
- 1428163264128 177
- IEEE Address = 10 181
- IEEE 488 Primer 183
- Section 8 IEEE 488 Primer 184
- IEEE 488 Bus Structure 185
- Service Information 195
- Section 9 Service Information 196
- 9.5 Replaceable Parts List 199
- Micro488/EX Command Summary 201
- Micro488/EX Error Messages 209
- Sample Terminal Programs 215
- Appendix D Sample Programs 216
Powiązane produkty i podręczniki dla Sprzęt komputerowy Measurement-computing Micro 488/EX rev.2.1
Sprzęt komputerowy Measurement-computing Personal488 rev.3.0 For DOS & Windows 3.Xi Instrukcja Użytkownika
(400 strony)
(400 strony)
Sprzęt komputerowy Measurement-computing DaqBoard 2000c Series rev.3.0 Instrukcja Użytkownika
(12 strony)
(12 strony)
AEG Electrolux A95288GA podręczniki
Instrukcje obsługi i podręczniki użytkownika dla Nie AEG Electrolux A95288GA.
Dostarczamy 1 pdf podręczników AEG Electrolux A95288GA do pobrania za darmo według typów dokumentów: Instrukcja Użytkownika
Komentarze do niniejszej Instrukcji