Measurement-computing Micro 488/EX rev.2.1 Instrukcja Użytkownika Pobierz pdf (Strona 15)

Section 2 Getting Started

2.1

Getting Started

2.1 Inspection

The Micro488/EX was carefully inspected, both mechanically and electrically,

prior to shipment. When you receive the interface, carefully unpack all items from the

shipping carton and check for any obvious signs of physical damage which may have

occurred during shipment. Immediately report any such damage found to the shipping

agent. Remember to retain all shipping materials in the event that shipment back to the

factory becomes necessary.

Every Micro488/EX is shipped with the following....

•

Micro488/EX IEEE 488 Bus Controller

•

127-0920 Instruction Manual

•

Power Supply TR-2; 115V or

TR-2E; 220/230V

2.2 Configuration

Three DIP switches internal to the Micro488/EX set the configuration of the

interface. NOTE: Selectable functions are read ONLY at power-on and should only be

set prior to applying power to the interface. The following figures illustrate the factory

default conditions which are:

Serial Port: IEEE:

9600 Baud Mode = System Controller

8 Data Bits Address = 10

2 Stop Bits Bus Terminator = CR-LF; EOI Disabled

No Parity Talk-back Enabled

Serial Terminator = CR-LF

Echo Disabled

RTS/CTS Handshake

1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 217 218

Brak uwag

Measurement-computing Micro 488/EX rev.2.1 Instrukcja Użytkownika Strona 15