Measurement-computing Micro 488/EX rev.2.1 Instrukcja Użytkownika Pobierz pdf (Strona 153)

Section 5 Command Descriptions

5.83

STERM

The

STERM

command sets the end-of-line terminators for output to the serial

host. All output to the serial port is terminated by the serial output terminator(s). All

input from the serial host must be terminated by either a Line Feed (LF) or Carriage

Return (CR) except

OUTPUT

#count

During

INPUT

, the Micro488/EX takes the data it receives from the bus device

until it detects the LF of other optionally specified input terminating condition. It strips

all CR and LF from the input data and appends the serial output terminator(s) before

sending it to the serial host. The default serial terminators for output are set by internal

DIP switches and are factory set for

SYNTAX

STERM[;]{term[term]|[NONE]}

STE[;]{term[term]|[NONE]}

term is one of

$char

, or

, specifying a terminator

character.

RESPONSE None

MODE Any

BUS STATES None

EXAMPLES PRINT#1,"STERM CR"

Set the serial output terminator to carriage-return.

PRINT#1,"STERM NONE"

Disable sending any serial output terminators.

PRINT#1,"STERM $&H0D"

Set the serial output terminator to carriage-return.

PRINT#1,"STERM $0"

Set the serial output terminator to NULL.

1 2 ... 148 149 150 151 152 153 154 155 156 157 158 ... 217 218

Brak uwag

Measurement-computing Micro 488/EX rev.2.1 Instrukcja Użytkownika Strona 153