Measurement-computing CB-COM-7012 Instrukcja Użytkownika Pobierz pdf (Strona 56)

CB-7012, CB-7014, CB-7017 User’s Manual

2.33 $AA7(TL)(TH)

Description: Set Target Low/High Values for Linear Mapping

Note: The command is for CB-7014D only.

This command must follow the $AA6(SL)(SH) command.

Syntax: $AA7(TL)(TH)[CHK](cr)

$ Delimiter character

AA Address of module to set (00 to FF)

7 Command for setting target values

TL target low level value in engineering unit format

TH target high level value in engineering unit format

Response: Valid Command: !AA[CHK](cr)

Invalid Command: ?AA[CHK](cr)

Syntax or communication error may get no response.

! Delimiter for valid command

? Delimiter for invalid command

AA Address of responding module (00 to FF)

Example:

Command: $076−10.000+10.000 Receive: !01

Set Address 01 target value −10 to +10, return successful.

Related Command:

Sec. 2.30, $AA3; Sec. 2.31, $AA5; Sec. 2.32, $AA6(SL)(SH)

Brak uwag

Measurement-computing CB-COM-7012 Instrukcja Użytkownika Strona 56