Measurement-computing Analyzer488 Instrukcja Użytkownika Strona 245

  • Pobierz
  • Dodaj do moich podręczników
  • Drukuj
  • Strona
    / 281
  • Spis treści
  • BOOKMARKI
  • Oceniono. / 5. Na podstawie oceny klientów
Przeglądanie stron 244
Section 6 Instrument Simulator
6.35
Execute X
Commands sent to the Analyzer488 will result in no action until the instrument is
instructed to execute these commands. This is done by sending an
X
, usually as the last
character of a command string. Most commands sent without an
X
are stored in an
internal buffer until an
X
is received. The
Bn
,
D/string/
, and
?
(query) commands
do not need an
Execute
command. Any number of
Execute
commands may be
inserted into the same command string.
SYNTAX:
commandX
Execute
command
EXAMPLES:
PRINT#1,"CLEAR10"
reset the Analyzer488
PRINT#1,"OUTPUT10;T2000"
send
T2000
to the Analyzer488
command input buffer. This will
cause the Analyzer488 to generate
a Service Request after 2 seconds
PRINT#1,"OUTPUT10;X"
instruct the Analyzer488 to execute
its command input buffer. The
Analyzer488 will start timing upon
receipt of the
X
.
Przeglądanie stron 244
1 2 ... 240 241 242 243 244 245 246 247 248 249 250 ... 280 281

Komentarze do niniejszej Instrukcji

Brak uwag