Measurement-computing PCM-DAS16D/12 Instrukcja Użytkownika Pobierz pdf (Strona 29)

8 CABLE & SCREW TERMINAL BOARD

The PCM-C37/33 is a 10 inch 33 conductor cable assembly for use with 33

pin PCMCIA cards. The PCM-C37/33 has a connector on one end and a 37

pin D type connector at the other. The chart below describes the color coding

of the wires for each of the 33 pins.

Blue/Red33Blue22White/Red11

Grey/White32Green21White/Green10

Black/White31White20White/Orange9

Red/White30Green/Yellow19White/Brown8

Green/White29Green/Red18White/Blue7

Orange/White28Red/Green17Tan6

Brown/White27Orange/Red16Violet5

Blue/White26Red/Orange15Orange4

Pink25Red/Blue14Brown3

Grey24White/Grey13Red2

Yellow23White/Black12Black1

COLORPINCOLORPINCOLORPIN

If you want to wire directly to your signal source, simply cut off the 37 pin

connector and wire up the signals using the color to pin number guide above.

If you wish to use a screw terminal board, please purchase a CIO-MINI37 and

connect it to the 37 pin connector end of the cable. Of course pins 34 to 37

will not have any function. Use the PCM-DAS16x/12 connector diagram

elsewhere in this manual to determine the function of the signals at the screw

terminals. The screw terminals are numbered 1 to 37, and the cable is wired

so pin 1 of the PCM board connects to pin 1 of the screw terminal, and so on.

1 2 ... 24 25 26 27 28 29 30 31 32 33 34 35 36

Brak uwag

Measurement-computing PCM-DAS16D/12 Instrukcja Użytkownika Strona 29