Measurement-computing CIO-DIO192 Instrukcja Użytkownika Pobierz pdf (Strona 6)

Chapter 1

Introducing the CIO-DIO192

Overview: CIO-DIO192 features

The CIO-DIO192 has 192 digital I/O connections, and eight 82C55 parallel-interface chips.

Each 82C55 chip controls 24 CMOS/TTL-compatible digital I/O pins. Each 24-bit group is divided into three

eight-bit ports, or two 8-bit ports and two 4-bit ports. Each port is programmable for input or output.

All I/O bits are set to input mode (high impedance) on power up and reset. Locations are available for installing

pull-up or pull-down resistors.

All signals pass through a 50-pin connector.

Software features

For information on the features of InstaCal and the other software included with your CIO-DIO192, refer to the

Quick Start Guide that shipped with your device. The Quick Start Guide is also available in PDF at

www.mccdaq.com/PDFmanuals/DAQ-Software-Quick-Start.pdf

Check www.mccdaq.com/download.htm

for the latest software version.

1 2 3 4 5 6 7 8 9 10 11 ... 19 20

Brak uwag

Measurement-computing CIO-DIO192 Instrukcja Użytkownika Strona 6