Measurement-computing USB-5100 Series Instrukcja Użytkownika Pobierz pdf (Strona 24)

USB-5100 Series Software Help Working with USB-5100 Series Data Loggers

Checking the Device Status

The Status dialog box displays real-time information about the attached logger, including the current state of the

logger, logging start time, current readings, and memory used. You can check whether a logger is waiting for

logging to begin, actively logging (unless it is logging at a fast logging interval), or stopped.

To check the status of a logger, complete the following steps:

1. Connect the logger to the computer.

2. Click the Status icon on the toolbar, or select

Device»Status.

Note

You can also check the status by clicking Status in the Launch Logger dialog box, but this shows details from

the previous launch.

This is an example of the Status dialog box. The information displayed varies depending on the logger that is

connected. See Status dialog box for more information.

Figure 12. Status Dialog Box

Important

Battery power drains more rapidly while checking status. Keep this in mind when frequently checking status

during a deployment. You can significantly reduce the demand on the battery by adjusting the Screen Refresh

Interval to five seconds or higher (not available on all loggers).

1 2 ... 19 20 21 22 23 24 25 26 27 28 29 ... 63 64

Brak uwag

Measurement-computing USB-5100 Series Instrukcja Użytkownika Strona 24