Measurement-computing ZonicBook 618E rev.3.4 Instrukcja Użytkownika Pobierz pdf (Strona 105)

Appendix B – TCP/IP and Resource Tests B

Before you run a test

Before testing the system, make sure the device has been properly installed and powered-on. Make sure all

cables are properly and securely connected.

When testing a ZonicBook/618E, if the unit does not respond within 30 seconds perform

the following steps:

1) reboot the system

2) upon power-up, re-open the Daq* Configuration applet

3) select another configuration setting

4) reinitiate the test

How to run the TCP/IP Test (The TCP/IP test is for Ethernet devices only)

The TCP/IP (Transmission Control Protocol/Internet Protocol) test is for Ethernet devices only. The test is

accessed and initiated as follows.

a. Open the Control Panel by navigating from the Windows’ Desktop as follows:

Start Menu ⇒ Settings ⇒ Control Panel

b. From the Control Panel, double-click the Daq* Configuration icon.

c. Double-click on the ZonicBook/618E from the Device Inventory configuration tree.

d. Click the “Test Hardware” tab.

e. Click the <TCP/IP Test> button.

The Test Hardware Tab

Appendix B 987295 TCP/IP and Resource Tests for ZonicBook/618E B-1

1 2 ... 100 101 102 103 104 105 106 107 108 109 110 ... 121 122

Brak uwag

Measurement-computing ZonicBook 618E rev.3.4 Instrukcja Użytkownika Strona 105