Measurement-computing WaveBook rev.5.3 Instrukcja Użytkownika Pobierz pdf (Strona 30)

2-10 System Setup & Power Options Connecting to the Ethernet

STEP 2 – Determine the type of Network Connection

To properly connect and configure a DaqBook/2000E or a WaveBook/516E, you must determine the type

of network that the device will become part of. This is because the type of network used has a direct

bearing on the IP address of the device.

Briefly, the four network types are as follows:

Dedicated Network - with a direct cable connection from the PC to the device

Dedicated Network - making use of a network hub or switch

LAN with a DHCP server

(Local Area Network with a Dynamic Host Configuration Protocol)

LAN without a DHCP server

(Local Area Network with no Dynamic Host Configuration Protocol)

Brief descriptions and illustrations follow.

Dedicated Network - with a direct cable connection from the PC to the device

In this scenario a DaqBook/2000E or a WaveBook/516E is connected directly to an Ethernet jack on a host

computer.

Dedicated Network using a Direct Cable Connection

Dedicated Network - making use of a network hub or switch

In this scenario the DaqBook/2000E or WaveBook/516E connects to the Ethernet through a network hub or

switch. At least one computer is also connected to the hub.

Dedicated Network using a Hub/Switch

Some network devices such as a wireless access point may act as a DHCP server. If this is

the case, follow the instructions for the LAN with a DHCP server. For detailed information

consult the documentation that is specific to your network device.

1 2 ... 25 26 27 28 29 30 31 32 33 34 35 ... 153 154

Brak uwag

Measurement-computing WaveBook rev.5.3 Instrukcja Użytkownika Strona 30