Measurement-computing USB-1096HFS Instrukcja Użytkownika Strona 22

  • Pobierz
  • Dodaj do moich podręczników
  • Drukuj
  • Strona
    / 27
  • Spis treści
  • BOOKMARKI
  • Oceniono. / 5. Na podstawie oceny klientów
Przeglądanie stron 21
USB-1096HFS User's Guide Specifications
Note 3: There is a total of 24 I/O per bank (PORTA, PORTB, PORTCH, PORTCL). These specifications are for a
power supply input voltage of 9 volts. Higher input voltages will increase the power dissipation and will further
reduce the total current available from each port.
Table 5. Environmental specifications
Operating temperature range 0 to 70 °C (see the de-rating curve in Graph 1)
Storage temperature range -40 to 85 °C
Humidity 0 to 90% non-condensing
USB specifications
Table 6. USB specifications
USB "B" connector Input
USB device type USB 2.0 (full-speed)
Device compatibility USB 1.1, USB 2.0
USB "A" connector Downstream hub output port
Supports USB 2.0 high-speed, full-speed and low-speed operating points USB hub type
Self-powered, 100 mA max downstream VBUS capability
Compatible products MCC USB Series products with a USB hub output port
USB cable type (upstream and
downstream)
A-B cable, UL type AWM 2527 or equivalent. (min 24 AWG VBUS/GND, min 28
AWG D+/D-)
USB cable length 3 meters max.
Data transfer rates
Table 7. Data transfer rate specifications
Digital I/O transfer rates
(software paced)
System dependent, 33 to 1000 port reads/writes or single bit reads/writes per
second typ.
Counter Read – System dependent, 33 to 1000 reads per second.
Counter/timer read/write rates
(software paced)
Counter Clear – System-dependent, 33 to 1000 writes per second.
Mechanical
Table 8. Mechanical specifications
304.8 mm (L) x 121.9 mm (W) x 20.0 mm (H)
Card dimensions
12.0" (L) x 4.8" (W) x 0.8" (H)
309.9 mm (L) x 132.1 mm (W) x 40.6 mm (H) Enclosure dimensions
12.2" (L) x 5.2" (W) x 1.6" (H)
Main connector and pin out
Table 9. Connector specifications
Connector type Screw terminal
Wire gauge range 14 AWG to 30 AWG
4-3
Przeglądanie stron 21
1 2 ... 17 18 19 20 21 22 23 24 25 26 27

Komentarze do niniejszej Instrukcji

Brak uwag