Measurement-computing PCIM-DAS16JR/16 Instrukcja Użytkownika Strona 18
- Strona / 27
- Spis treści
- BOOKMARKI
Oceniono. / 5. Na podstawie oceny klientów
PCIM-DAS16JR/16 User's Guide Functional Details
Analog inputs
The analog input mode is switch-selectable for eight differential or 16 single-ended analog inputs. The board
offers a 100 kHz maximum sample rate in single and multi-channel scans at any gain setting. A 1024 sample
FIFO assures that data taken from the board is transferred into computer memory without the possibility of
missed samples. The board has a digital trigger input with software-selectable trigger edge.
Software selects the bipolar/unipolar input configuration and input range. lists the analog input ranges
and resolutions for the available input configurations and gains.
Table 4-1
Table 4-1. Input range and resolution
Bipolar Range Resolution Unipolar Range Resolution
±10 V 305 µV 0 to 10 V 153 µV
±5 V 153 µV 0 to 5 V 76.3 µV
±2.5 V 76.3 µV 0 to 2.5 V 38.1 µV
±1.25 V 38.1 µV 0 to 1.25 V 19.1 µV
Burst mode
Channel-to-channel skew results from multiplexing the A/D inputs. Channel skew is defined as the time
between consecutive samples. For example, if four channels are sampled at a rate of 1 kHz per channel, the
channel skew is 250 µs (1 ms/4).
Burst mode minimizes channel-to-channel skew by clocking the A/D at the maximum rate between successive
channels. At the 1-ms pulse, channel 0 is sampled. After 10 µs, channel 1 is sampled. Channel 2 is sampled 10
µs after channel 1 is sampled. Channel 3 is sampled 10 µs after channel 2 is sampled. No samples are then taken
until the next 1-ms pulse, when channel 0 is sampled again. In this mode, the rate for all channels is 1 kHz, but
the channel-to-channel skew (delay) is now 10 µs. The minimum burst mode skew/delay on this board is 10 µs
(refer to ). Figure 4-2
Figure 4-2. Burst mode timing
Ch0 Ch1 Ch2 Ch3
Ch0 Ch1 Ch2 Ch3
10 Sµ
Delay
Burst mode pacer is
fixed at 10 µS
The length of the delay between bursts is
set by one of the internal counters, or
may be controlled via the external trigger.
4-2
- PCIM-DAS16JR/16 2
- HM PCIM-DAS16jr_16.doc 3
- Table of Contents 5
- About this User's Guide 7
- Software features 8
- Chapter 2 9
- Hardware 9
- Additional documentation 9
- Installing the software 10
- Channel mode switch 11
- A/D trigger edge jumper 12
- Clock frequency jumper 12
- Pin out – main I/O connector 14
- Cabling 14
- Programming languages 16
- Register-level programming 16
- Functional Details 17
- Analog inputs 18
- Digital I/O 19
- Counter/timer I/O 19
- Chapter 5 20
- Required equipment 20
- Specifications 21
- Accuracy 22
- Analog input drift 22
- Noise performance 22
- Digital input / output 23
- g 0 to 70 °C 24
- -40 to 100 °C 24
- 0 to 95% non-condensing 24
- Declaration of Conformity 26
Powiązane produkty i podręczniki dla Sprzęt komputerowy Measurement-computing PCIM-DAS16JR/16
(20 strony)Radio Shack 31-5021 manuels
Manuels d'utilisation et guides de l'utilisateur pour Récepteurs et amplificateurs Radio Shack 31-5021.
Nous fournissons des manuels en pdf 1 Radio Shack 31-5021 à télécharger gratuitement par type de document : Manuel de l'utilisateur
Komentarze do niniejszej Instrukcji