Measurement-computing Medallion Getting Started rev.2.1 Instrukcja Użytkownika Strona 17
- Strona / 18
- Spis treści
- BOOKMARKI
Oceniono. / 5. Na podstawie oceny klientów
January 2001 Medallion Getting Started
15
STARTING THE MEDALLION
After all the hardware is assembled and the Software and Drivers are installed you are ready to start
using your Medallion system.
· On the Start Menu, select the Programs command, then select Medallion, and finally select
FAS.
CHECK LIST FOR VERIFYING OPERATION
1. Software Installed? See Software Installation.
2. Hardware Connected? See Hardware Assembly.
3. Hardware Switches Set? Set Switches to Factory Default Settings.
See Configuring the Medallion.
4. Start your Application
5. Connect Signal to Channel 1 Use Internal Signal Generator
6. Turn On Signal Generator Press SGON button in FAS.
7. Start Data Acquisition Click the ACQUIRE button.
You should see a signal with a 500 Hz Peak in Plot Display window #1.
TROUBLESHOOTING THE PCMCIA CARD
If your PCMCIA card is not responding:
1. Open the Control Panel.
2. Double-click on the Devices icon to open the Devices window. Look for the “cac” entry.
Under normal operations, the Status should = Started, and the Startup should = Automatic, as
shown below.
· To start “cac” without restarting the computer; highlight the “cac” line, and click the Start
button.
· To enable/disable “cac;” click the Startup button and click the appropriate “Enable/Disable”
button.
· To set how the device will activate after future startups, click the HW Profiles button. We
suggest you select Automatic, as shown below.
TROUBLESHOOTING DRIVERS INSTALLATION (WINDOWS 95/98 ONLY)
If the Medallion DSP does not appear under Other Devices, you must delete the PCMCIA Driver by
following these steps.
1. Run “regedit”
2. Open folder “HKey-LOCAL MACHINE”
3. Open folder “ENUM”
4. Open folder “PCMCIA”
5. Delete file “CAP3210-IBF9”
Return to the beginning of your Drivers installation.
- Getting Started User’s Manual 1
- TABLE OF CONTENTS 5
- MEDALLION GETTING STARTED 7
- WHAT YOU NEED TO GET STARTED 8
- SOFTWARE INSTALLATION 9
- VIEW ON-LINE MANUALS 9
- VIEW CONTENTS OF CD-ROM 10
- 8-CHANNEL MEDALLION 11
- 16-CHANNEL MEDALLION 11
- HARDWARE ASSEMBLY 11
- WITCH CONFIGURATIONS 12
- INSTALLING MEDALLION DRIVERS 13
- INDOWSNT DRIVERS 14
- LAYBACK CONTROL DRIVERS 15
- EDIT YOUR AUTOEXEC.BAT FILE 16
- STARTING THE MEDALLION 17
Powiązane produkty i podręczniki dla Sprzęt komputerowy Measurement-computing Medallion Getting Started rev.2.1
Sprzęt komputerowy Measurement-computing Medallion Rotate rev.2.3 Instrukcja Użytkownika
(52 strony)
(52 strony)
Sprzęt komputerowy Measurement-computing Personal488 rev.3.0 For DOS & Windows 3.Xi Instrukcja Użytkownika
(400 strony)
(400 strony)
Sprzęt komputerowy Measurement-computing DaqBoard 2000c Series rev.3.0 Instrukcja Użytkownika
(12 strony)
(12 strony)
Radio Shack 31-5021 manuels
Manuels d'utilisation et guides de l'utilisateur pour Récepteurs et amplificateurs Radio Shack 31-5021.
Nous fournissons des manuels en pdf 1 Radio Shack 31-5021 à télécharger gratuitement par type de document : Manuel de l'utilisateur
Komentarze do niniejszej Instrukcji