Measurement-computing DaqBook 2000 Series Installation Instrukcja Użytkownika Pobierz pdf (Strona 19)

Section B

969596

Connecting a DaqBook/2000E or WaveBook/516E to the Ethernet B-11

4. Test the system connections.

a. Make sure the device has been properly installed and is powered-on.

b. Make sure all cables are properly and securely connected.

c. Click the “Test Hardware” tab.

d. Click the <Resource Test> button.

The test results have two components: Resource Tests and Performance Tests.

Appendix G, Resource and Performance Tests, includes a brief explanation of the tests.

When testing a WaveBook or DaqBook device, if the unit does not respond within 30

seconds perform the following steps:

1) reboot the system

2) upon power-up, re-open the Daq* Configuration applet

3) select another configuration setting

4) reinitiate the test

This completes the procedure for connecting a DaqBook/2000E or WaveBook/516E to the Ethernet. At this

point you should refer to the more detailed user documentation that applies to your Ethernet-connected

device. User’s manuals typically include pinouts, information on system explanation, data acquisition, and

links to software and programming documents (in PDF format).

Reference Notes:

For additional device and system information:

➣ DaqBook/2000E users should refer to the DaqBook/2000 Series User’s Manual

(p/n 1103-0901) and the DBK Options Manual (p/n 457-0905).

➣ WaveBook/516E users should refer to both the WaveBook User’s Manual,

(p/n 489-0901) and the WBK Options Manual (p/n 489-0902).

➣ Programming information is contained in the Programmer’s Manual, (p/n 1008-0901).

Note: You can access PDF documents directly from the opening screen of the data acquisition CD

via the <View PDFs> button.

1 2 ... 14 15 16 17 18 19 20 21 22 23 24 ... 45 46

Brak uwag

Measurement-computing DaqBook 2000 Series Installation Instrukcja Użytkownika Strona 19