Measurement-computing DaqBook 2000 Series Installation Instrukcja Użytkownika Pobierz pdf (Strona 17)

Section B

969596

Connecting a DaqBook/2000E or WaveBook/516E to the Ethernet B-9

STEP B.6 -

Configure and test the System using the Daq* Configuration Applet

The Daq* Configuration applet, designed for 32-bit Windows 95/98/Me/NT/2000/XP systems, is located in

the Windows Control Panel. It allows you to add or remove a device and change configuration settings.

The included test utility provides feedback on the validity of current configuration settings, as well as

performance summaries.

1. Open the Daq* Configuration Applet.

a. Open the Control Panel by navigating from the Windows’ Desktop as follows:

Start Menu ⇒

⇒⇒

⇒ Settings ⇒

⇒⇒

⇒ Control Panel

b. From the Control Panel, double-click the Daq* Configuration icon.

2. Add the first-level device to the list of installed devices.

The first-level device is the device that will be connected directly to the Ethernet, via a host computer’s

Ethernet jack or a jack on a network hub. The DaqBook/2000E and WaveBook/516E are each examples of

first-level devices.

a. Select the Computer image in the Device Inventory configuration tree (following figure).

b. Click the <Add Device> button. The “Select Device Type” box will appear.

c. Select the DaqBook2000E or the WaveBook516E from the list of devices, as applicable.

d. Click the <OK> button. The “Properties” box will appear for the selected device.

Using Daq* Configuration Device Inventory & Select Device Type to Add a Device

Note: Although the above figure indicates that a WaveBook/516E was selected as the first level

device, we could similarly have a DaqBook/2000E as the first-level device.

1 2 ... 12 13 14 15 16 17 18 19 20 21 22 ... 45 46

Brak uwag

Measurement-computing DaqBook 2000 Series Installation Instrukcja Użytkownika Strona 17