
USB-2627 User's Guide Specifications
24
Timer output
Table 14. Timer output specifications
PWM output with count, period, delay, and pulse width registers
Default state is idle low with pulses high, software-selectable, output invert
68-pin SCSI: TMR0 (pin 3), TMR1 (pin 37)
40-pin (J4): TMR0 (pin 33), TMR1 (pin 32)
40-pin (J5): TMR2 (pin 31), TMR3 (pin 35)
4.4 V min (IOH = –50 µA)
3.76 V min (IOH = –1.0 mA)
0.1 V max (IOL = 50 µA)
0.44 V max (IOL = 1.0 mA)
64 MHz base rate divided by 2
32
; software-selectable.
Memory
Table 15. Memory specifications
4 kS analog input/2 kS analog output
32 KB (30 KB firmware storage, 2 KB calibration/user data)
Power
Table 16. Power specifications
Supply current (Note 4, Note 5)
Note 4: This is the total quiescent current requirement for the device that includes up to 10 mA for the Status
LED. This value does not include potential loading of the DIO bits, +VO pin, or the XDACx outputs.
Note 5: USB 2.0 ports are required by USB 2.0 standards to supply 2500 mW (nominal at 5 V, 500 mA).
Self-powered hubs and externally-powered root port hubs provide up to 500 mA of current for a USB
device. Battery-powered root port hubs, such as in a laptop PC, provide 100 mA or 500 mA, depending
on the manufacturer. If your laptop is constrained to the 100 mA maximum, you need to purchase a
self-powered hub.
Komentarze do niniejszej Instrukcji