Measurement-computing USB-2527 Instrukcja Użytkownika Pobierz pdf (Strona 11)

USB-2527 User's Guide Installing the USB-2527

Caution! Avoid redundant connections. Ensure there is no signal conflict between SCSI pins and the

associated header pin (J5, J7, and J8). Also make sure there is no conflict between theTB7 TC

connections and the SCSI and/or the 40-pin header connections.

Failure to do so could possibly cause equipment damage and/or personal injury.

Also, turn off power to all devices connected to the system before making connections. Electrical

shock or damage to equipment can result even under low-voltage conditions.

Information on signal connections

General information regarding signal connection and configuration is available in the Guide to Signal

Connections. This document is available on our web site at www.mccdaq.com/signals/signals.pdf.

Caution! Always handle components carefully, and never touch connector pins or circuit components unless

you are following ESD guidelines in an appropriate ESD-controlled area. These guidelines include

using properly-grounded mats and wrist straps, ESD bags and cartons, and related procedures.

Avoid touching board surfaces and onboard components. Only handle boards by their edges. Make

sure the USB-2527 does not come into contact with foreign elements such as oils, water, and

industrial particulate.

The discharge of static electricity can damage some electronic components. Semiconductor

devices are especially susceptible to ESD damage.

Connecting the board for I/O operations

Connectors, cables – main I/O connector

The following table lists the board connectors, applicable cables, and compatible accessory products for the

USB-2527.

Board connectors, cables, and compatible hardware

Parameter

Specification

Connector type

Main connector: 68-pin standard "SCSI type III" female connector

Auxiliary connectors: Four, 40-pin header connectors

Compatible cables — main connector

CA-68-3R — 68-pin ribbon cable; 3 feet.

CA-68-3S — 68-pin shielded round cable; 3 feet.

CA-68-6S — 68-pin shielded round cable; 6 feet

Compatible cables — 40-pin connectors

C40FF-x

Compatible accessory products using the

CA-68-3R, CA-68-3S, or CA-68-6S cables

TB-100 terminal connector

Compatible accessory products using the

C40FF-x cable

CIO-MINI40

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 63 64

Brak uwag

Measurement-computing USB-2527 Instrukcja Użytkownika Strona 11