Measurement-computing USB-1024HLS Instrukcja Użytkownika Pobierz pdf (Strona 10)

USB-1024HLS User's Guide Installing the USB-1024HLS

Installing the software

Refer to the Quick Start Guide for instructions on installing the software on the Measurement Computing Data

Acquisition Software CD. This booklet is available in PDF at www.mccdaq.com/PDFmanuals/DAQ-Software-

Quick-Start.pdf.

Installing the hardware

Be sure you are using the latest system software

Before you connect the USB-1024HLS, make sure that you are using the latest versions of the USB drivers.

Before installing the USB-1024HLS, download and install the latest Microsoft Windows updates. In particular,

when using Windows XP, make sure you have XP Hotfix KB822603 installed. This update is intended to

address a serious error in Usbport.sys when you operate a USB device. You can run Windows Update or

download the update from www.microsoft.com/downloads/details.aspx?familyid=733dd867-56a0-4956-b7fe-

e85b688b7f86&displaylang=en. For more information, refer to the Microsoft Knowledge Base article

"Availability of the Windows XP SP1 USB 1.1 and 2.0 update." This article is available at

support.microsoft.com/?kbid=822603.

To connect the USB-1024HLS to your system, turn your computer on, and connect the USB cable to a USB

port on your computer or to an external USB hub that is connected to your computer. The USB cable provides

power and communication to the USB-1024HLS.

When you connect the USB-1024HLS for the first time, a

Found New Hardware popup balloon (Windows XP)

or dialog (other Windows versions) appear as the USB-1024HLS is detected.

Another Found New Hardware balloon or dialog opens that identifies the USB-1024HLS as a USB Human

Interface Device.

When the balloon or dialog closes, the LED on the USB-1024HLS should flash and then remain lit. This

indicates that communication is established between the USB-1024HLS and your computer

Caution! Do not disconnect any device from the USB bus while the computer is communicating with the

USB-1024HLS, or you may lose data and/or your ability to communicate with the USB-1024HLS.

If the LED turns off

If the LED is lit but then turns off, the computer has lost communication with the USB-1024HLS. To restore

communication, disconnect the USB cable from the computer, and then reconnect it. This should restore

communication, and the LED should turn back on.

2-2

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 20 21

Brak uwag

Measurement-computing USB-1024HLS Instrukcja Użytkownika Strona 10