Measurement-computing TempBook rev.3.0 Instrukcja Użytkownika Pobierz pdf (Strona 24)

3-6 Using TempView (16-bit)

11-16-00

TempBook User’s Manual

Select Device

The Select Device menu includes the following functions:

Select LPT Port Brings up a dialog box prompting the user to select the LPT port on which the TempBook is

connected. After an LPT port is selected, TempView opens a new session with the

TempBook hardware and attempts to communicate with it. If the hardware is found, the

main window is opened. If no hardware is found, the user is alerted and the application is

opened with the controls disabled. To reconfigure the LPT port setting and try again, click

Select LPT Port under the Select Port menu. If the TempBook hardware still can not be

identified by the software, exit TempView and try the TEMPTEST utility program.

Simulated Device This command opens a TempView session but does not attempt to communicate with

TempBook hardware. Instead, the application simulates the interaction between the

software and the hardware. If TempView is presently attached to real TempBook

hardware, this command will close that session.

Window

The Window menu includes the following functions:

PostView This command launches an instance of the PostView application.

Charts This command displays the charts window.

Analog Output This command displays the analog output window.

Digital I/O This command displays the digital I/O window.

Ctr/Tmr This command displays the counter/timer window.

Acquisition

The Acquisition menu includes the following functions:

Go This command arms the hardware for an acquisition to disk. When the trigger is satisfied,

the acquisition begins. All of the interactive I/O controls are disabled while the system is

armed. No acquisition parameters can be altered at this time.

Enable Input

Reading Column

This command reads the analog inputs and puts the numeric values in the spreadsheet in

the "Reading" column. If it is already enabled, this command disables it.

Charts

The Charts menu of the charts window includes the following function:

Enable Charts This command starts the scroll chart running. If the chart is already running, this command

stops it.

1 2 ... 19 20 21 22 23 24 25 26 27 28 29 ... 165 166

Brak uwag

Measurement-computing TempBook rev.3.0 Instrukcja Użytkownika Strona 24