Measurement-computing DBK55 Instrukcja Użytkownika Pobierz pdf (Strona 7)

DBK55 On-board Jumper Configurations

Configuration Jumpers Channel Selected Functions

JP3 and JP4 CH 0

JP23 and JP24 CH 1

JP43 and JP44 CH 2

JP63 and JP64 CH 3

Analog

(Default)

Digital

JP103 and JP104 CH 4

JP123 and JP124 CH 5

JP143 and JP144 CH 6

Input Circuit Selection, pg. 8

• The default is Analog Input;

Pins 1 and 2 connected for

two associated jumpers.

• For Digital Input mode; pins

2 and 3 are connected for

the two associated jumpers.

JP163 and JP164 CH 7

* Two jumpers are required to set Analog

or Digital. For example, JP3 and JP4,

which are at the input and output ends of

the circuit, respectively.

JP1 CH 0

JP21 CH 1

JP41 CH 2

JP61 CH 3

JP101 CH 4

JP121 CH 5

JP141 CH 6

Attenuation Selection, pg. 8

• The default is Attenuation

Enabled (reduced

sensitivity). Pins 1 and 2

are connected.

• For Full Sensitivity

(Attenuation Disabled) pins

2 and 3 are connected.

JP161 CH 7

Attenuation

Enabled

(Default)

Full

Sensitivity

JP2 CH 0

JP22 CH 1

JP42 CH 2

JP62 CH 3

JP102 CH 4

JP122 CH 5

JP142 CH 6

JP162 CH 7

Low Pass Filter Selection, pg. 8

• The default LPF is 100 kHz.

Pins 1 and 2 are connected.

• For an LPF of 300 Hz, pins

2 and 3 are connected.

• For an LPF of 30 Hz, pins 3

and 4 are connected.

Jumper Locations Partial Board, Not Drawn to Scale

DBK Option Cards and Modules 987693 DBK55, pg. 7

1 2 3 4 5 6 7 8 9 10 11 12

Komentarze do niniejszej Instrukcji

Brak uwag

Measurement-computing DBK55 Instrukcja Użytkownika Strona 7

Komentarze do niniejszej Instrukcji

Powiązane produkty i podręczniki dla Sprzęt komputerowy Measurement-computing DBK55