Measurement-computing Daq PC-Cards Instrukcja Użytkownika Pobierz pdf (Strona 13)

☛

For Windows 2000 Operating Systems Only

1. Insert the Daq PC-Card, label-side up, into your computer’s PCMCIA adapter slot.

A dialog box should appear, indicating that Windows has begun the installation process; and

“Found New Hardware Wizard” will open, indicating that Windows 2000 is ready to install

drivers for the new hardware.

If the Windows Operating System detects the Daq PC-Card, skip directly to the section

entitled, Connect the Interface Cable [Step 3]. The procedure begins on page 2-5.

3. Click <Next>. The Wizard will proceed to a screen with the text, “Install Hardware Device

Drivers.”

4. Select the radio button that reads, “Search for a suitable driver for my device.”

5. Click <Next>. The “Locate Driver Files” screen appears.

6. Check the “Specify a location” check box. Then click <Next>.

At this point you will be prompted to insert the manufacturer’s installation disk. Click

<OK>.

7. Using Window’s <Browse> feature, locate your Data Acquisition CD.

8. Expand the contents of the CD; then click on the folder labeled, “Windows 2K Driver

Disk.”

9. Select the file named, “DAQPCC2K.INF;” then click <Open>. You will once again see the

Hardware Wizard’s prompt to insert the manufacturer’s installation disk.

10. Click <Ok>.

A screen with the text, “Driver Files Search Results,” appears.

The screen identifies the device and driver that were found.

11. Click <Next> to install the driver.

12. After the Hardware Wizard indicates that “Windows has finished installing the software for

this device,” Click <Finish.>

This completes the Windows 2000 Software setup for the Daq PC-Card.

Daq PC-Card User’s Manual

928596

Installation 2-3

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 27 28

Brak uwag

Measurement-computing Daq PC-Cards Instrukcja Użytkownika Strona 13