Measurement-computing PC104-DAC06 Instrukcja Użytkownika Pobierz pdf (Strona 6)

of completeness, and will allow you to set the hardware configuration of the board if

you do not have immediate access to InstaCal

and/or your computer.

3.0 HARDWARE INSTALLATION

Several switch and jumper settings must be made before the PC104-DAC06 is

installed into the computer. There are six jumper blocks for setting the gain of each

channel, a simultaneous update jumper for each pair of channels and a base address

switch.

3.1 BASE ADDRESS

The switches on your base address switch are set at the factory to address 300 hex

(768 decimal) as shown in Figure 3-1. Unless there is already a board in your system

using address 300h (768 decimal), we suggest leaving the switches as they are set at

the factory..

Figure 3-1. Base Address Switches

Certain address are used by the PC, others are free and may be used by the

PC104-DAC06 and other expansion boards.

1 2 3 4 5 6 7 8 9 10 11 ... 15 16

Brak uwag

Measurement-computing PC104-DAC06 Instrukcja Użytkownika Strona 6