Measurement-computing CB-NAP-7000D Instrukcja Użytkownika Pobierz pdf (Strona 33)

NAP7000D User Manual (Version 1.0) ---- 33

2.11 Setting CB-7044, CB-7050, CB-

7060

Step1: Check a ConvN(here N means 0 to 31) to start the setting CB-7000 module

configuration. In this example, the Conv17 is checked.

Step 2: Select the desired module type as Fig 2-10 shown(method 1 or method 2).

In this case, please select 7044, 7050 or 7060. In this examples, the 7044 is selected.

Step 3: After selecting 7044, a window titled setting Configuration for 7044 will

pop up as Fig 2-25 shown.

Fig 2-25 The setting Configuration for 7044 window.

This window given some information about the CB-7044 module. Because CB-7044

is digital input/output module. All the portion of Digital Input and Digital Output is

active. The user can set in all portion. And the portion of Digital Input show that there

are 4 digital input channels. Digital Output show that there are 8 digital output

channels. When push Digital Input button in the Digital Input portion. When push

one command button among Output Assigned Value, Output Read Back Value and

1 2 ... 28 29 30 31 32 33 34 35 36 37 38 ... 55 56

Brak uwag

Measurement-computing CB-NAP-7000D Instrukcja Użytkownika Strona 33