Measurement-computing Analyzer488 Instrukcja Użytkownika Pobierz pdf (Strona 246)

Section 6 Instrument Simulator

6.36

Waveform Terminator Yn

The waveform terminator command,

, is used to set the terminator character

that will be sent by the Analyzer488 after a waveform is sent. A waveform consists of

256 readings and each reading is one data point in a waveform. When the Analyzer488

is addressed to talk, it will append the waveform delimiter to each waveform.

The

mode is the most commonly accepted terminator, CR-LF. Command

reverses the sequence to send LF-CR. Command

Y2,

the default value, sends CR

only and

sends LF only. The command

sets the waveform terminator to the

value set by using the User Waveform Terminator command,

SYNTAX:

CR LF

LF CR

CR only (default)

LF only

Value set by User Waveform Terminator (

)

Return current Waveform Terminator selection

EXAMPLES:

PRINT#1,"OUTPUT10;Y2X"

select Carriage Return terminator

at end of waveform

1 2 ... 241 242 243 244 245 246 247 248 249 250 251 ... 280 281

Brak uwag

Measurement-computing Analyzer488 Instrukcja Użytkownika Strona 246